Welcome To Our New Web Site... Hope You Find It Attractive And Easy To Use... If You Have Any Questions Or Concerns.

10% off of all of our products for a limited time only.

TRAINING FLAGSHIP v5 Stabber 14

MSRP: $249.00
Our Price: $199.00
Savings: $50.00 (20%)
BJD-MP-TRN-FS05-S14

Category: Steel Stabbers
Qty:

Wing Chun Butterfly Swords: TRAINING FLAGSHIP v5 - Stabber 14

Disclaimer
(READ PRIOR TO PURCHASE!)

Ultimate Wing Chun Butterfly Swords - TRAINING Line: FLAGSHIP

These swords are part of our 2018 Training line, which focuses on brings you cost-effective high-quality training swords based on our weapons-grade models. The training sword models were picked from the top-sellers from the Flagship, Domination, Tomb Warrior, and Ip Man Replica lines of swords. The construction quality of these swords for the price is very high. They are easily superior to other models in this price range. Whenever we had to make a cost-cutting choice to get a sword for you at a lower price, we favored quality materials and construction over cosmetics niceties. 

Features of the Training Swords in this series: 
Regardless of the model, the training swords will feature the following specs, and these features will supersede the default specs of the model listed elsewhere: 

Blade Steel: High-Quality 420 Stainless
Blade Grind: Wide Lenticular Grind (for improved edge strength).
Blade Sharpness: Blunt with 3mm edge. (For safety and so they don't cut into people/poles, etc).
Blade Finish: Matte
Blade Fuller: These swords do not have a fuller (blood groove).
Blade Weight: These swords are at a combat training-weight that builds strength and endurance that will equate to more speed and power later. They are in-line with the weapon-grade sword's weights or slightly more. 

Handle Wood: Brown Pakkawood
Handle Ergonomics: (Varies on model): The handles on Flagship models are angled ergonomically. On the Domination models they have a very slight angle, but are mostly straight (not perfectly straight like the weapon-grade models, though). Tomb Warrior and Ip Man Replicas have straight handles with ergonomic grips.
Handle Width: The handles are slightly thinner than the weapon-grade models so that you can add grip tape to them. They are a fully functional width, but people with larger hands might want to use the grip tape to expand the width some. Grip tape can make a big difference when you are sweaty and training hard. 

Balance: The balance on these swords tries to imitate the weapons-grade models. However, because the blades are thicker than their weapon-grade counterparts, the balance might be slightly more blade-heavy. That said, they should all balance before the end of the quillon tip, regardless of model.
Tang: These swords are a partial tang welded into another large steel plate in the handle, which is welded to the D-guard. They will hold up quite well for training.
D-Guard: The D-Guard on these swords are slightly thinner than the weapons-grade models and have slightly more squared edges.
Sheath: These swords come with a cheap 2-in-1 nylon sheath. Sheathes are given for free "as-is". The heft of these swords would make them great candidates for one of the MasterPath carrying cases. 

The following specs are what make this sword different:
Blade Style: Stabber Blade 
Blade Length: Approx 14 inches (35.5 cm) 

Reference Specs: 
Each sword in the FLAGSHIP line has similar specs. To see those (keeping in mind the above specs supersede these below) click the buttons below: 


Series: Flagship Line

Blade Steel: Usually, High-Quality Austrian Bohler D2 Tool Steel OR High-Quality 440C OR a special edition steel (see specifics above) 
Blade Grind: Usually, Wide Hollow Grind (for better slicing) OR a Lenticular (Convex) Grind (for better edge strength) (see specifics above)
Blade Sharpness: Usually, Blunt with 1mm edge OR Sharp OR Razor Sharp (see specifics above)
Blade Finish: Usually, Glossy OR Matte/Satin OR a special edition finish (see specifics above)
Blade Ricasso/Choil: These swords have a Ricasso.
Blade Fuller: These swords have a fully functional fuller (blood groove).
Blade Tapers: These swords have profile and distal tapes for improved function and balance.

Tang: True Full Tang (exposed/visible between handle scales). Please wipe the sword tang and blade down after use, or it will eventually rust due to the oils in your hands.
D-Guard Metal: AISI 304 Stainless Steel.
Knuckle-Bow: Flagship Rounded/Curved Slimline

Handle Angle/Alignment: Angled Handle. Aligned to tip and spine for more powerful chopping and stabbing.
Handle Shape: Bellied Ergonomic.
Handle Type: Full Handles (unless otherwise stated above)
Handle Type: Usually, Laminated Stabelized Wood (to prevent shrinkage and crackino over time) OR Canvas Micarta (expands with sweat to improve grip). (unless otherwise stated above)
Flipping vs Trapping: Quillon is designed for both: Sword can easily and comfortably be flipped and held in a reverse grip. It also traps well. 

Sword Weight: Combat Weight - Each sword weighs approx 1.8 lbs (815g) on average. Paired swords are generally within 10 grams (0.35 oz) of each other. Because they are hand made, sword pairs can vary in weight up to approx 50 grams in either direction. Also, the steels used and blade gride can also change the weight. This is just the AVERAGE across all the swords of this model. 

Sword Measurements: Please refer to the following list, based on the blade length and shape mentioned above. And keep in mind if the blade is 13.5 inches, for example, overall length will match that: 

HYBRID BLADES:
- Overall approx 16.25 inches. Blade approx 11 inches. Belly approx 2.5 inches. Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 17.25 inches. Blade approx 12 inches. Belly approx 2.5 inches. Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 18.25 inches. Blade approx 13 inches. Belly approx 2.5 inches. Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 19.25 inches. Blade approx 14 inches. Belly approx 2.5 inches. Base approx 2.25 inches. Handle approx 4.5 inches.

CHOPPER BLADES:
- Overall approx 16.25 inches. Blade approx 11 inches. Belly approx 3 inches. Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 17.25 inches. Blade approx 12 inches. Belly approx 3 inches. Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 18.25 inches. Blade approx 13 inches. Belly approx 3 inches. Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 19.25 inches. Blade approx 14 inches. Belly approx 3 inches. Base approx 2.25 inches. Handle approx 4.5 inches.

STABBER BLADES:
- Overall approx 16.25 inches. Blade approx 11 inches. Belly approx 2 inches (narrowing). Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 17.25 inches. Blade approx 12 inches. Belly approx 2 inches (narrowing). Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 18.25 inches. Blade approx 13 inches. Belly approx 2 inches (narrowing). Base approx 2.25 inches. Handle approx 4.5 inches.
- Overall approx 19.25 inches. Blade approx 14 inches. Belly approx 2 inches (narrowing). Base approx 2.25 inches. Handle approx 4.5 inches.

Notes: These swords are hand-made. No two swords are perfectly identical. Small variations in the measurements are typical. Please read #2 under "Things you should know" and "Not Product Defects" under the warranty for more information. 

Extra Info
This product was added to our catalog on Sunday 10 March, 2019.
Tell someone you know about this product.

Disclaimer
(READ PRIOR TO PURCHASE!)

Binding Agreement: The terms of this Agreement govern your purchase and/or possession of the product (and all transferees), which is a pair of Butterfly Swords (hereafter the term "Product" refers to one or both swords, as applicable). If you had no opportunity to review these terms prior to purchase or receipt and decline to be bound, return the Product to your seller or transferor immediately.
Assumption of Risk, Indemnity, Representations: This Product is a real weapon (even if the edge is blunt) and therefore inherently dangerous at all times. Do not use (as used herein "use" and its variations include but are not limited to martial arts practice, demonstrations, combat, cleaning, transport, display, other storage and possession) except after proper training, under expert supervision, and with great care. Do not use for two-person training. If the edge is sharp, use for display purposes only. You understand that using the Product is an inherently dangerous activity. You voluntarily assume the risk of all personal injury (including but not limited to maiming and death of self and others) and damages resulting from use of the Product for training, combat or otherwise. You hereby agree to release and hold harmless (i) Everything Wing Chun, LLC and its member(s), owner(s), and personnel ("EWC"), Aaron Cantrell, (ii) Modell Design LLC, its member(s), owner(s) and personnel, Jeffrey D. Modell, and (iii) their supplier(s) and reseller(s) (hereafter "Us"), from any and all liability and negligence resulting in personal injuries, death or damages, losses, fees and expenses, including actual attorneys' fees, arising from use of the Product ("Damages"). For example, if you stab yourself cleaning or practicing with them, drop one on your foot, chop a friend's finger off, poke your eye out, the swords break and you get hurt, a child picks them up and gets hurt, or whatever, you agree that is your own fault and won't hold Us responsible. This Agreement clearly and unambiguously exculpates Us from even our own negligence and the consequences thereof, but not gross negligence or intentional misbehavior.
In plain language, assuming we are not grossly negligent or evil, you won't sue Us successfully for injury or damages resulting from the swords for any reason what-so-ever, and we really mean it. Your sole remedy for problems is the Limited Warranty below.
You represent to Us that (i) you are at least 18 years of age, (ii) the Product is lawful in your local jurisdiction, (iii) you will use the Product in compliance with all applicable laws, and (iv) you will not to loan or transfer the Product to anyone who does not agree to be bound by the provisions of this Agreement. You agree to indemnify, defend, and hold Us harmless from any and all Damages arising from or related to your breach of these representations.
Limited Warranty: The only warranty on this product is a Limited Warranty against defects in materials and workmanship from EWC in lieu of all other warranties, express or implied, including fitness for any intended use, subject to the following terms and conditions. The Limited Warranty extends for 30 days from the date of purchase. If you purchased this product directly from EWC, EWC will replace, repair, or refund the price paid, the option at its discretion. These are the only remedies for any warranty claim or other claim, including but not limited to Damages, available from Us; provided, however, if you purchased this product from an authorized reseller, we will recommend they offer a similar 30 day Limited Warranty protection. Your claim must include original proof of purchase showing seller, price and date of purchase.
Not Product Defects: This product was made by hand. Normal variations in construction, appearance and weight that are characteristic of the materials or hand work are not defects. Minor pitting is normal for our cast and hot drop forged D Guards and hot drop forged integral swords. High carbon steel and good stainless steel can corrode, pit, rust and tarnish. Water and humid conditions promote these. Never store a knife or sword in or near a leather sheath as the tanning acids or vapors can cause rapid corrosion. Brass tarnishes over time. The handle scales are a wood product and therefore can expand or contract when exposed to varying humidity and temperature (though, depending on the materials used, they may have been stabilized with glue or resin reducing the impact). The above are natural characteristics of the workmanship or materials and not product defects.
Advice on Care: These are high-end swords made with weapons grade stainless or "semi-stainless" steel that will rust absent proper care. We recommend cleaning them with rubbing alcohol after each use or touch, waxing with Renaissance Wax (or a similar non-acidic wax) as needed, and periodically stripping, cleaning and re-waxing them. Keep dry and do not store in damp or humid area, or in direct sunlight. For more info read the full article Combating Rust on Swords ( June 28, 2011).
Neglect: Blade tests shown on Everything Wing Chun's website are dangerous and should not be duplicated. Any knife/sword can be broken or damaged if subjected to sufficient abuse. These destructive tests CONSTITUTE GROSS ABUSE OF A SWORD and will void all warranties.
Law and Forum: This Agreement is governed by the laws of the State of Wyoming, USA without regard to its conflict of law rules, and any dispute shall be finally resolved by the courts of the State of Wyoming. You agree to submit to the jurisdiction of the courts of said state.
Blue Pencil Clause: If any provision herein is held to be unenforceable, then this Agreement shall be construed or deemed amended to the extent necessary to render the otherwise unenforceable provision, and the rest of the Agreement, valid and enforceable. If a court declines to so construe or amend this Agreement, the invalidity or unenforceability of any provision(s) of this Agreement shall not affect the validity or enforceability of the remaining provisions, which shall be enforced as if the offending provision(s) had not been included in this Agreement.

 

There are currently no product reviewsWrite a review!


Request Price Match for: TRAINING FLAGSHIP v5 Stabber 14

Please Login for Price match Request!!

 

 Keep me logged in Password Forgotten? Click here

Have Questions Ask a Question
No Question yet